Pipe Lathe (Q1313, Q1319, Q1327, Q1332Q1338, Q1342, Q1350)

• Type: Horizontal Lathe
• Processing Accessory: Normal
• Guide Rail: Horizontal Guide Rail
• Model NO.: Q1313, Q1319, Q1327, Q1332Q1338
• Tool Holder: 1
• Power Source: Electric
• Controlling Mode: Artificial
• Automatic Grade: Manual
• Setting Mode: Floor-type
• Precision: Normal Precision
• Certification: ISO 9001
• Condition: New
• Production Capacity: 15/Mon

Product Description

Q13 serie pipe threading machine is the lathe which having be used for machining pipe thread of thread of inside and outside as well as metric and british threads.At the same time can be used for conventional lathes to producing excircle,bore and end face of shaft,plate parts.
This kinde of machine tools have being fit on tapper device to use producing parts with tapper.
The key components of the machines being used HT250 high strength grey cast iron and passing three-level aging treatment:precipitation heat treatment-6 months natural aging-passing vibratde aging and again 2 months natural aging after rough machining.That can ensure stability and reliability of machine finish.The slide way of the machine have passing supersonic frequency quenching and which seal ground finish by high precision guideway grinder and slide way of saddle be stick on teflon,so,lower the friction coefficient and reduce the wear for slide way of machine.The spindle of the machine used hot rolling thick wall steel tube of materials 45# going through thermal refining and elaborately machining.The spindle bearings of the machine fitting together with famous brand at domestic and overseas.

ITEMS	Model: Q1313
Swing over bed (mm)	Φ630/800
Swing over carriage (mm)	Φ340/540
Range of processing pipe thread (mm)	Φ30-126
Distance between centers (mm)	1500/3000
Max taper of work-piece (mm)	1:4
Taper bar travel (mm)	750
Width of bed (mm)	490/550
Spindle bore (mm)	Φ130
Main motor power (kw)	7.5
Step and range of spindle speed (r/min)	18steps/12-642
Longitudinal feed (grades/mm)	26/0.07-1.33
Cross feed (grades/mm)	22/0.02-0.45
Metric thread pitch (grades/mm)	52/1-24
Inch thread pitch (grades/inch)	40/2-28
Lead screw pitch (inch)	1/2
Carriage rapid traverse speed (mm/min)	4000
Cross slide rapid traverse speed (mm/min)	2300
Carriage travel (mm/min)	1310/2810
Cross slide travel (mm)	390/490
Tool post travel (mm/min)	200
Distance between spindle center and tool post (mm)	32.5
Size of tool section (mm)	30×30
Max rotation angle of tool post (°)	±60°
Cross slide dial movement range (mm/scale)	0.05
Tool post dial movement range (mm/scale)	0.05
Dia and taper of tailstock quill (mm/mores)	Φ100/m5#
Tailstock quill travel (mm)	205
Tailstock cross travel (mm)	±15
Overall dimension(L/W/H)	(3657/ 5157)×1449×1393
Net weight(kg)	4260/ 5110
Chuck	Φ400/ 3-jaw chuck/ manual
Floor stand and taper bar	Both